config.arm64_v8a

config.xxxhdpi

config.en

Everyone

Mitsubishi Electric US

Nougat

The Mitsubishi Electric US Cooling & Heating app—kumo cloud®—enables you to remotely monitor and manage your mini split systems at any time and from anywhere. The kumo cloud app is only compatible with the following Wi-Fi Adapters and Wireless Interfaces installed by a qualified contractor into your Mitsubishi Electric indoor units. (Available to the US market at this time.)
• Wireless Interface (PAC-USWHS002-WF-1)*Latest model*
• Wi-Fi Adapter (PAC-WHS01WF-E)
The app works with Mitsubishi Electric’s Wi-Fi and Wireless Interfaces to provide the following features.
• Manage all your zones and different homes
• Monitor all zone temperatures
• Monitor and change any zone’s:
• Set temperature
• Mode (Heat, Cool, Auto, Dry, Fan, and Off)
• Fan speed
• Vane direction
• Receive notification of any zone’s:
• Error codes
• Filter alert
• Receive notification when any site’s temperature is out of range
• Program a schedule for any individual zone or a whole home
• Automatic download of new firmware to the latest interface
• Automatically receive app upgrades to new features and functions once they are available
If you are a homeowner with a single mini-split system, multi-zone system, or multi-home installation you will find it convenient to use the kumo cloud app to remotely monitor and manage all your zones.
The interfaces must be installed by a qualified Mitsubishi Electric contractor. Your qualified contractor will be able to advise you on the compatibility of our interfaces with your systems. The compatibility charts for previous models can be found here: https://www.kumocloud.com/compatibility
The kumo cloud app also supports:
• The kumo station™ (PAC-WHS01HC-E) and facilitates centralized control of third-party supplemental heating, humidification, dehumidification and ventilation equipment.
• The Wireless Temperature and Humidity Sensor (PAC-USWHS003-TH-1), an optional part to provide remote sensing capabilities to the Wireless Interface.
• System changeover to allow Wireless Interfaces attached to indoor units in some model families to negotiate the system transition from heating to cooling and back automatically.
三菱电机US冷却和加热应用程序 - kumogoog®-使您可以随时随地远程监控和管理您的迷你分体式系统。 kumo云应用程序仅与由合格承包商安装到您的Mitsubishi Electric室内机中的以下Wi-Fi适配器和无线接口兼容。 （目前可在美国市场上销售。）
   •无线接口（PAC-USWHS002-WF-1）*最新型号*
   •Wi-Fi适配器（PAC-WHS01WF-E）
该应用程序与三菱电机的Wi-Fi和无线接口配合使用，可提供以下功能。
   •管理所有区域和不同的家园
   •监控所有区域温度
   •监控和更改任何区域：
   •设定温度
   •模式（加热，冷却，自动，干燥，风扇和关闭）
   • 风扇转速
   •叶片方向
   •接收任何区域的通知：
   •错误代码
   •过滤警报
   •当任何站点的温度超出范围时接收通知
   •为任何单个区域或整个家庭编制时间表
   •自动将新固件下载到最新界面
   •一旦可用，自动接收应用程序升级到新功能和新功能
如果您是拥有单个迷你分割系统，多区域系统或多家庭安装的房主，您会发现使用kumo云应用程序远程监控和管理所有区域非常方便。
接口必须由合格的三菱电机承包商安装。您的合格承包商将能够就您的系统接口的兼容性向您提供建议。可以在此处找到以前型号的兼容性图表：https：//www.kumocloud.com/compatibility
kumo云应用程序还支持：
   •kumo station™（PAC-WHS01HC-E），便于集中控制第三方辅助加热，加湿，除湿和通风设备。
   •无线温度和湿度传感器（PAC-USWHS003-TH-1），是为无线接口提供远程感应功能的可选部件。
   •系统切换，允许连接到某些型号系列室内机的无线接口协商系统从加热到冷却的过渡，并自动返回。


kumo cloud

kumo cloud的最新版本

其他版本